Scorpion CNC Granite Finger Bit, 15mm x 37mm, Twisted

Scorpion CNC Granite Finger Bit, 15mm x 37mm, 1/2 Gas Thread, Twisted

Item
16015
Country of origin
South Korea
Stock
In stock
$61.19
  • Alpha
  • Terminator
  • Blick
  • Blick
Save
$$$ OFF
Take Advantage Now!

Scorpion CNC Granite Finger Bit, 15mm x 37mm, 1/2 Gas Thread, Twisted

Consider the Scorpion CNC Finger Bits...

The Scorpion Soft Bond Finger Bit is ideal for hard stones like granite.

Hard stone requires the finger bit bond to be softer, so that the diamonds are exposed sooner to cut the stone.

Softer stone are milled best with a finger bit that have a harder bond matrix, so that the diamonds are not exposed as fast.


Specs and Benefits of Scorpion:

  • Soft bond
  • Faster cutting and longer life
  • Clean finish after cutting
  • Less noise and less amp draw
  • 5,500-5,800 RPM
  • Feed Rate of 200mm /min for the first 2 meters, then 300-350mm /min (depending on stone) after the bit is broken in.

Diameter15mm

Speed RPM7500-8000

Dimensions15mm x 37mm

Thread Size1/2 Gas