PitBull BigDog Hydraulic Stone Chiseler With SPX PA9 Pump Chisels
Omega Diamond PitBull BigDog Hydraulic Stone Chiseler
Portable hydraulic stone chiseler, works on most stone types - including engineered stone! Capable of up to 3½ inch (8 cm) thick laminated stone! With a pancake compressor! Get to 120 PSI and you will have 5 tons of force!
- The only shear on the market capable of producing scalloped edges
- Up to 5 tons of pressure
- Air-powered hydraulic pump
- Full range of 0.4" (0.9 cm) to 3.3"h (8.5 cm) stone thicknesses
- Works on laminated and man-made stone
- Hand held
- Inexpensive mining-grade carbide teeth
- Quick-change jaws
- 3" wide for faster job completion
- Breaks all stone types
- Weighs only 18 pounds
- Made in the USA
100psi (7 BAR) air pressure is required for the maximum 5 ton potential. The pump can operate at a minimum of 40psi (9 BAR), however the PitBull Stone Chiseler will only be able to deliver 2 tons of force at that pressure.
Air compressor CFM (size of compressor) is not so important for the PitBull's operation. The PA9 hydraulic pump is capable of operating a range of hydraulic cylinders, including large 100 ton units, however the PitBull Stone Chiseler only uses a small bore 5 ton piston. The air supply only needs enough volume to be able to keep the air pressure up at the rate you wish to work. Harder stone will need more tonnage (more psi) to chisel. The more CFM your air compressor puts out, the faster you will be able to cycle any air driven hydraulic pump resulting in faster work up to a limit.
Notice: Please read and understand the Owner’s Manual before operating any machinery to avoid damage or risk of bodily injury.