Talon™ Premium Dry Core Bits

You can core a hole in only 30 seconds with Talon™ Platinum Core Bits. Using the recommended speeds (10,000 RPM for Talon™ Platinum Dry and 3,000 RPM for Talon™ Platinum Wet Core Bits), allows the bit to cut through granite in just half a minute, leaving a smooth hole with little to no chipping.

This incredible cutting speed is produced by using the best-suited bond to the application. In a wet environment, using a water-fed tool at 3,000 RPM will produce the best cutting speed and cleanest result.

For the best results in dry conditions, 10,000 RPM is recommended. This high RPM will keep the diamonds and bond cool and allow the core bit to do all the work.

Advantages:

• Sets a new standard for dry core bits
• No drill press required
• 10,000 suggested RPM